Home > > RF/Microwave Components

RF/Microwave Components

Please select a particular RF/Microwave components to view our available products.

Components Categories

RF / Microwave Components
Obsolete

RF/Microwave Components

Amplifiers

Antennas

Attenuators

Adapters & DC Blocks

Calibration Kits & Cables

Circulators & Isolators

Couplers & Hybrids

Duplexers & Multiplexers

Filters

Flexible Waveguides

Limiters

Load Terminations

Mixers

Phase Shifters

Power Detectors

Power Divider Combiners

Rotary Joints

Switches

Signal Generator Synthesizers

TR Modules

By:

Amplifiers

Power Amplifiers (DC Powered)

Ultra Broadband High Power Amplifiers.
High linearity and flat gain response.
RF Power up to 500W and beyond.
Frequencies up to 70GHz.
Hermetic versions available.

Low Noise Amplifiers (DC Powered)

Hermetic Sealing and Customization available upon request
Low Noise Amplifiers
Frequencies beyond 100GHz
Both Ultra Wide Band and Narrow Band models
Low Noise Figure and High Linearity

RF Benchtop / EMC Amplifier (110/220V)

Ultra Broadband EMC System Amplifiers.
RF Power up to 1KW.
Built-in Self Protection and Calibration.

Overdrive Protected Amplifiers

Highly Reliable DC power amplifiers with built-in overdrive protection.
High Linearity and flat gain response.
Hermetic versions available.

Variable Gain Amplifiers (VGA)

Voltage Controlled Amplifier.
Broadband applications.
High Linearity over the tuning range.
Hermetic Versions available.

Automatic Level Control Amplifiers

Broadband Amplifiers with built-in AGC to control signal levels.
High Linearity over the gain range.
Hermetic Versions available.

Low Phase Noise Amplifiers

Standard gain amplifiers with low phase noise performance.
Hermetic Versions available.

Bi-Directional Amplifiers

Bidirectional amplifiers for boosting signals in both directions.
Both TDD and FDD Models available.
Hermetic versions available.

By:

Antennas

Standard horn antennas for transmitting or receiving.
Both coaxial and waveguide inputs.
Multiple gain and pattern options.
Dual polarized and broadband models available.

By:

Attenuators

Fixed Attenuators (Coaxial)

High power coaxial attenuators.
1 to 50dB models standard.
Multiple connector and power options.
Frequencies up to 67GHz.

Manual Attenuators (Coaxial)

Mechanical precision step or variable attenuators.
High power models available.
Useful for any test setup to tune any RF level.

Digital Control Step Attenuators

TTL controlled digital step attenuators.
Up to 9-bit operation and 127dB of range with step sizes as low as 0.1dB.
Fast settling time.
Hermetic versions available.

Voltage Control Attenuators

Variable voltage controlled attenuators.
Offer infinite steps for precision tuning of an RF signal.
Single bias control line.
Low insertion loss and high dynamic range.
Hermetic versions available.

USB/Ethernet Control Step Attenuators

Digital control step attenuators with built-in USB/Ethernet interface.
Any of our digital control attenuators can be produced as a USB/Ethernet version (Please inquire).

Fixed Attenuators (Waveguide)

High power precision waveguide attenuators for signal reduction.
Both standard and coupling models.

Manual Attenuators (Waveguide)

Mechanical precision step or variable waveguide attenuators.
High dynamic range and high power handling.

By:

Adapters & DC Blocks

Coaxial Adapters

Standard adapters for converting connectors between or within series.

DC Blocks

Used to prevent undesired DC voltages from transferring between components.
Broadband operation and low insertion loss.

Waveguide Adapters

Used to convert a waveguide interface to coaxial.
Multiple flange and connector options.
Both 90 degree and straight versions.
Multiple material and finish options.
Low VSWR.

By:

Calibration Kits & Cables

Automatic Calibration Modules Calibration Kits

Frequency range: 20 kHz to 44 GHz
Impedance: 50 Ohm

VNA Calibration Kits

Standard open, short, load manual calibration kits for any VNA.
Cost-effective solution to expensive E-cal systems.

Digital Control Testing Cables

Cable assemblies for RF Lambda components designed to interface directly to our components.
Multiple connector options available.

RF Calibration/Testing Cables

Precision RF cables for test and measurement.
High reliability and repeatability.

By:

Circulators & Isolators

Circulators (Coaxial / Drop-In)

RF Circulators to provide isolation between RF components.
High isolation and low insertion loss.
Multiple connector and power handling options.
Drop-in or coaxial packaging.
Hermetic versions available.

Isolators (Coaxial / Drop-In)

RF Isolators to provide isolation between RF components.
High isolation and low insertion loss.
Multiple connector and power handling options.
Drop-in or coaxial packaging.
Hermetic versions available.

Waveguide Circulators / Isolators

Waveguide circulators and isolators to provide isolation between RF components.
High isolation and low insertion loss.
Multiple flange and power options.

By:

Couplers & Hybrids

Directional Couplers

High directivity single and dual directional couplers.
Flat frequency response and high power handling.
Coupling from 6-50dB.
Hermetic versions available.

Hybrid Couplers

90-degree and 180-degree wideband hybrid couplers.
High power handling.
Good phase and amplitude matching.

Waveguide Couplers & Hybrids

High power waveguide couplers with high directivity and power handling.
Various coupling factors.
Excellent coupling accuracy and flatness.

By:

Duplexers & Multiplexers

Multiplexers

Used for combining multiple RF signals onto a single RF connection.
Used for combining 2 RF signals onto a single RF connection.
Low insertion loss (IL) and good flatness.
High power handling.
Multiple frequency variations available.

Duplexers

Used for combining multiple RF signals onto a single RF connection.
Used for combining 2 RF signals onto a single RF connection.
Low insertion loss (IL) and good flatness.
High power handling.
Multiple frequency variations available.

Waveguide Duplexers

Used for combining 2 waveguide signals onto a single waveguide connection.
Low insertion loss (IL) and good flatness.
High power handling.
Multiple frequency variations available.

By:

Filters

Filters - LPF HPF BPF

Various RF filters used for removing unwanted signals from any RF source.
Multiple technologies.
High pass, low pass, and band pass available.
Hermetic versions available.

Notch Filters

Used for removing specific frequencies from an RF signal.
High rejection and low insertion loss.
Customizable.

Waveguide Filters

High selectivity waveguide filters with high power handling.
Customizable.
Multiple flange options available.

By:

Flexible Waveguides

Flexible waveguide sections.
Used to support flexible placement of rigid waveguide components.
Multiple length options and flange options.

By:

Limiters

High power handling, fast response.
High power RF limiters are used to protect downstream RF equipment.
Hermetic versions available.

By:

Load Terminations

RF Coaxial Loads

High power coaxial terminations.
Multiple connector options.
Power up to 1KW and frequencies up to 67GHz.

Mis-Matched Terminations

Used for testing RF equipment's sensitivity to VSWR mismatches.
Both variable and fixed models available.

RF Waveguide Loads

High power waveguide terminations.
Low VSWR and high power handling.
Multiple flange options available.

By:

Mixers

Used to up or downconvert RF signals.
Ultra wideband performance.
Low IL.
Both active and passive models available.
Hermetic versions available.

By:

Phase Shifters

Voltage Control Phase Shifters

Voltage control step phase shifters for tuning of an RF signal's phase.
180 and 360 degree options.
Good amplitude balance over the phase range.
Hermetic versions available.
Variable control.

Digital Step Phase Shifters

180 and 360 degree models available with multiple step size options.
Digital control step phase shifters for tuning of an RF signal's phase.
Good amplitude balance over the phase range.
Hermetic versions available.

USB/Ethernet Control Phase Shifters

Digital control phase shifters with USB/Ethernet interface.
Multiple phase shift options available.
Easy to configure and integrate into any setup and control with a PC or Ethernet controller.

Manual Adjustable Phase Shifters

Standard trombone-style precision coaxial phase shifters.
Multiple phase shift options available.
High power handling and low VSWR.
Multiple connector and frequency options.

Manual Waveguide Phase Shifters

Standard trombone-style precision waveguide phase shifters.
Multiple phase shift options available.
High power handling and low VSWR.

By:

Power Detectors

Coaxial Power Detectors

Fast response coaxial power detectors for RF signal measurement.
Broadband performance.
Low VSWR.
Both positive and negative polarity models.

Waveguide Power Detectors

Fast response waveguide power detectors for RF signal measurement.
Low VSWR and good repeatability.

By:

Power Divider Combiners

Coaxial Power Dividers / Combiners

Standard Wilkinson or resistive divider combiners.
High power handling.
Good phase and amplitude balance.
Hermetic versions available.

Waveguide Power Combiners / Magic Tees

N-way waveguide power dividers and Magic Tees.
High power handling, low insertion loss, and high isolation.

By:

Rotary Joints

Waveguide or coaxial rotary joints used to provide rotational freedom of movement with RF signals.
Low insertion loss and highly reliable.

By:

Switches

PIN, GaAs and GaN Switches (High Speed)

Solid-state switches from SPST up to SP160T.
Both reflective and absorptive models.
Fast switching speed.
TTL control.
Hermetic versions available.

Electromechanical Switches

SP2T up to SP8T electro-mechanical switches.
High switching reliability and low insertion loss.

USB Control Solid State Switches

Solid-state switches with built-in USB and Ethernet interface.
Easy integration into any test setup.
IP address configurable.

Waveguide Switches

Manual or electrically controlled high-power waveguide switches.
SP2T or DPDT versions.

By:

Signal Generator Synthesizers

RF Synthesizers

DC-powered USB-controlled wideband signal sources.
Low phase noise.
Tunable output power.
On-board reference and external reference input.

RF Signal Generators

AC-powered USB-controlled wideband signal sources.
Low phase noise.
Tunable output power.
On-board reference and external reference input.

By:

TR Modules

Block Down-Converters

System modules for converting RF signals down to IF or to baseband.
Low noise figure and high linearity.

TX / RX Modules

System transmit/receive modules for upconverting and downconverting RF signals to IF and vice versa.
High power and high linearity on the TX.
Low noise figure on the RX.

Block Up-Converters

System modules for converting IF signals up to RF.
High output power and high linearity.

RF & Microwave

AC / DC & Parametrics

Optical

RF/Microwave Components

RF/Microwave Components

Amplifiers

Antennas

Attenuators

Adapters & DC Blocks

Calibration Kits & Cables

Circulators & Isolators

Couplers & Hybrids

Duplexers & Multiplexers

Filters

Flexible Waveguides

Limiters

Load Terminations

Mixers

Phase Shifters

Power Detectors

Power Divider Combiners

Rotary Joints

Switches

Signal Generator Synthesizers

TR Modules