The Chroma 13100 Electrolytic Capacitor ORDERING INFORMATION Analyzer is a general measurement instrument designed for analyzing the features of electrolytic capacitor s. It has multiple functions that can be programmed based on the capacitor features by altering the settings to test metal oxidization thin-film withstand voltage, capacitor leakage current, capacitance, dissipation factor, impedance and equivalent serial resistance, etc.

Used with the special designed sequential switch test box A131001, it can complete the test for multiple capacitors or aluminum foil rapidly, accurately and simultaneously in a short time without changing any test wire.

The report printing function is capable of printing the test results correctly and completely; and the built-in data calculation function can compute the test data of the product instantly for CPK analysis. To avoid the inefficient calculation process done manually, a test software application is also available for you to create a quality report easily. It meets the EIAJ RC-2364A regulations for electrolytic capacitor test and is a test instrument of choice.

Chroma A131001 is a sequential switch test box of ten channels specially designed for Chroma 13100. Each test socket on the test box is implemented with Kelvin measurement, which is suitable for the precise measurement requirement for low impedance and low leakage current. With the SCAN function in 13100 it is able to control the C, D, Q, Z, ESR and LC tests for electrolytic capacitor to be done consecutively without switching the capacitor manually. This increases the test efficiency significantly as it costs only 1/10 of the original test time.

Key Features

• C meter provides Z/C/D/Q/ESR parameters for test
• Available 7 test frequencies from 100~100kHz for selection
• 0.1% basic measurement accuracy
• The thin-film withstand voltage results can be displayed in graph by converting them to an actual rising curve
• CPK calculation function for 1000 capacitor test results that is convenient for analyzing the production capability
• 320 x 240 dot-matrix LCD display
• 200 sets of internal memories and 4M SRAM interface card for saving and recalling the parameter settings
• Designed for100mΩ range with accuracy measurement up to 0.1mΩ
• Non-Relay switch is built in. It is safe and reliable as the discharge circuit is close to the fixed power
• Perform electric polarity test before charge to avoid the danger of explosion
• Softpanel for leakage current data statistics analysis
• Equipped with RS-232, printer and scanner controller interfaces
• Meet the test regulation of EIAJ RC-2364A
• A131001 scan box has four terminals designed for measuring accurate high frequency and low impedance

The 11200 Capacitor Leakage Current / IR Meter is Chroma's newest digital leakage cur rent meter. I t provides DC 1~650V, 0 . 5~5 0 0mA ( 1 5 0mA f o r V>1 0 0V) o r DC1~800V, 0.5~500mA (50mA for V>100V) DC power source wi th vol tage meter and nano-ampere meter. Mainly used for electrolytic capacitor leakage current testing, and aluminum-foil withstand voltage testing (EIAJ RC-2364A). And also can be used for active voltage checking or leakage current testing of absorber, zener diode, neon lamp, etc. Standard RS-232 interface, optional GPIB & Handler interface, high speed and stable measurement capabilities enable the Chroma 11200 can be used for both component evaluat ion on the product ion l ine and fundamental leakage current or IR testing for bench-top applications.

Key Features

• Capacitor leakage current test function
• Insulation resistance (IR) test function
• Basic accuracy: 0.3%
• Constant current DC power source with discharge function
• Forward voltage function for diode, LED, zener diode and varistor
• Surge voltage test function for electrolytic capacitor (JIS C5101/5102/5140/5141)
• Option contact check function to improve test reliability
• Aluminum-foil withstand voltage and risetime test function (for EIAJ RC-2364A)
• Precision low constant current charge capability (0.5mA ±0.05mA, meet EIAJ RC-2364A requirement for withstand voltage testing of lower WV aluminum-foil)
• Large charge current (500mA) capability to fasten charge speed
• 1.0V~650V/800V DC voltage source
• 0.001uA~20.00mA leakage current test range with 4 digits resolution
• Digital timer inside
• Comparator and pass/fail alarming beeper function
• Standard RS-232 interface
• Optional GPIB & handler interface

The Chroma 11800/11801/11810 Ripple Current Tester is a precision tester designed for electrolytic capacitors load life testing. It provides constant ripple current output and constant peak voltage (Vpeak = Vdc + Vac_peak) output digital control function. Let load life testing for electrolytic capacitors becomes easier and more reliable. And, the Chroma 11800/11801/11810 use excellent output amplifier design technology to reduce power consumption and internal temperature rising. For long time testing requirement, it can reduce electricity cost and perform high stability. The Chroma 11800/11801/11810 is a just right test solution for electrolytic capacitors quality evaluation.

Key Features

• Digital constant current output and constant peak voltage output control function
• Four terminal contact test jig design, ensure accurate monitoring of voltage dropped on capacitors under test (patent pending)
• Paired cooper-foil wiring test cable to reduce voltage drop on the current driving loop and to ensure accurate monitoring of ac level dropped on capacitors under test (patent pending)
• 0-500 V DC bias voltage source, 0.3% basic accuracy
• 0.01~30A, 100Hz/120Hz/400Hz/1kHz AC ripple current source, (±0.5% reading+0.1% of range) basic accuracy (Model 11800)
• 0.01~10A, 20kHz~100kHz AC ripple current source, 2% basic accuracy (Model 11801)
• 0.03~10A, 20kHz~1MHz AC ripple current source (Model 11810)
• Monitoring software (option) for multiple Ripple Current Testers
• Lower power consumption and lower electricity cost
• Large LCD display (320 x 240 dot-matrix)
• Alarm for indicating of normal or abnormal test termination, Tested time will be recorded if the test is terminated abnormally. An automatic discharge is always performed after test termination
• Standard RS485 interface is provided for computer monitoring
• Optional 20-fixtures Series or Parallel test jigs
• Digital timer inside
• CE marking (Model 11800/11801)